News Docu Finder - Downloads Contact Company English / Worldwide + 49 7720 3903-0
PRODUCTS

Welcome to the world of measurement, transmission and evaluation.

Discover the variety of the Kübler products and solutions. Its wide portfolio ranges from standard products up to special solutions for most various sectors. We will be pleased to address also individual challenges. Modifications and special solutions will be implemented in a quick and straightforward way.

We will be happy to advise you. +49 7720 3903-952 | support@kuebler.com

INDUSTRIES

Your application is our focus.

Kübler offers for every application the suitable measurement, transmission and evaluation solution. Our sound application knowledge in many areas, together with highest quality awareness for products and our high-level service, ensure you a strong and reliable partner at your side.

We will be happy to advise you. +49 7720 3903-849 I support.int@kuebler.com

SERVICE

Welcome to the Service area of the Kübler Group.

We ensure confidence and planning security all over the world. The high quality requirements we set for our products and for ourselves also reflect in our service offer. This offer ranges from competent and personal product advice, through the joint definition of the solution in case of specific challenges, to on-site commissioning. Besides high-class products, also secure long-term high service quality.

We will be happy to support you. +49 7720 3903-849 I support.int@kuebler.com

CAREER

Impulses for your career. Welcome to TOP JOB Employer.

Your personal and professional competencies are the focus of our attention. Find the right job for your future now and become a part of our success story.

We're there for you. +49 7720 3903-222 I info@kuebler.com

PRODUCTS INDUSTRIES SERVICE CAREER
PRODUCTS MEASUREMENT Encoders Product Finder Encoders Sendix 5000 - Product Details

Encoders Absolute multiturn

Sendix 5000

  • Unique variety of variants
  • Particularly resistant
  • 24one delivery promise - temporarily not available!
  • Dimension Ø 58 mm
  • 16 Bit Singleturn
  • 16 Bit Multiturn
  • max 15 mm Hollow shaft, Blind hole
  • max 1/2" Hollow shaft, Blind hole

The Standard Encoder for automation.

Sendix 5000 / 5020 incremental encoders offer special resistance to vibrations and installation error due to their robust bearing construction using the Safety Lock™ design. The stable die-cast housing, the high protection up to IP67 and the wide temperature range from -40 °C to +85 °C allow universal use. This family of encoders is subject to continuous technical development and now offers a unique variety of ordering options.

Robust performance
  • Increased resistance to vibrations and installation error, avoidance of machine downtime and repairs due to robust bearing construction using the Safety Lock™ design.
  • Remains leak-free even in rough everyday use, offers high safety against field failures and is suitable for outdoor use thanks to a stable die-cast housing and protection up to IP67.
  • Captive clamping ring for hollow shaft encoders.
  • Wide temperature range -40°C to +85°C.
Many variant
  • Suitable connection variant for every specific case:   
    • cable connection with different standard lengths, M12 (5- or 8-pin), M23 (12-pin), MIL (7- or 10-pin) and Sub-D connector.In addition: Variants with connector fitted in the cable – for error-free electrical connection to your control.
  • Reliable mounting in a wide variety of installation situations: comprehensive and proven fixing possibilities.
  • Compatible with all US and European standards.
  • Wide range of standard pulse ranges up to max. 5000 pulses per revolution.
Accessories
Fastening arm set, rigid

For hollow shaft encoders
with flange ø 58 mm
Mounting radius 32.5 ... 143.5 mm
Designed for functional safety technology.
For applications with very low axial and radial play at low dynamics.

Scope of delivery
- Torque support (stainless steel)
- 3 screws M3x6 for mounting to the encoder

Connection to the application (not included in delivery)
- 1 torque pin 8.0010.4049.0075


8.0010.4051.00FS
Accessories
Torque stop, flexible

For hollow shaft encoders
with flange ø 58 mm
Mounting radius 39.5 ... 142.75 mm
Designed for functional safety technology.
For applications with axial and radial play at low dynamics.

Scope of delivery
- Torque support (stainless steel)
- 3 M3x6 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 1 screw


8.0010.4047.00FS
Accessories
Stator coupling (FS)

For hollow shaft encoders
with flange ø 58 mm
Mounting radius 31.5 mm
Designed for functional safety technology by 4-screw principle.

Scope of delivery
- Stator coupling (stainless steel)
- 4 screws M3x6 for mounting to the encoder

Connection to application (not included in delivery)
- 4 screws


8.0010.40B2.00FS
Accessories
Adapter flange, square, 4 mm

For shaft encoders with clamping flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 4 screws


8.0010.2800.0000
Accessories
Adapter flange, square, 4 mm

For shaft encoders with clamping flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 4 screws


8.0010.2600.0000
Accessories
Adapter flange, square, 4 mm

For shaft encoders with clamping flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 4 screws


8.0010.2120.0000
Accessories
Isolation insert, hollow shaft Ø 42mm

Thermal and electrical insulation of the encoders (temperature range -40°C to +115°C). These insulating inserts prevent currents through the encoder bearings. These can occur when used with inverter-controlled three-phase or AC vector motors and considerably shorten the service life of the encoder bearings. In addition, the encoder is thermally insulated because the plastic does not transfer the heat to the encoder.

Insulation insert (plastic).


8.0010.4017.0000
Accessories
Spring washer coupling Ø 30mm, 1-piece

For applications with high speeds and low axial errors. For potential separation between encoder and drive.

Variants - for shaft diameter d1/d2 in mm
06/06


8.0000.1301.XXXX
Accessories
Bellows coupling

Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.

Bellows coupling (stainless steel).


8.0000.1102.XXXX
Accessories
Bellows coupling

Bellows couplings are used for the cost-optimized connection of motor and encoder. In addition, a correction of angular errors between drive and encoder is achieved. Compensation for larger axial errors.

Bellows coupling (stainless steel).


8.0000.1202.XXXX
Accessories
Fastening eccentrics

For shaft encoders with synchro flange ø 50 ... 70 mm

Scope of delivery
- 3 eccentric
- 3 screws


8.0010.4100.0000
Accessories
Fastening eccentrics

For shaft encoders with synchro flange ø 36 mm

Scope of delivery
- 3 eccentric
- 3 screws


8.0010.4200.0000
Accessories
Assembly bell

For shaft encoders with flange ø 50 ... 58 mm
Fast encoder mounting. Electrical and thermal insulation through glass-fibre reinforced plastic and insulating spring washer coupling - complete delivery as a set.

Scope of delivery
- Mounting bell
- Spring washer coupling (8.0000.1401.XXXX)
- Mounting eccentric (8.0000.4B00.0000)
- Mounting accessories


8.0000.4500.XXYY
Accessories
Angular flange

For shaft encoders with flange ø 50 ... 58 mm

Scope of delivery
- Angle flange (aluminium)
- 3 screws for fastening to the encoder.

Connection to the application (not included in delivery)
- 2 screws


8.0010.2300.0000
Accessories
Flange, Ø 58mm

For shaft encoders with flange ø 50 ... 58 mm
Adapter for converting a clamping flange into a synchro flange.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws


8.0010.2180.0000
Accessories
Flange, Ø 115mm Euroflange

For shaft encoders with flange ø 70 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder

Connection to application (not included in delivery)
- 6 screws


8.0010.2170.0000
Accessories
Flange, Ø 115mm Euroflange

For shaft encoders with flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for fastening to the encoder

Connection to the application (not included in delivery)
- 6 screws


8.0010.2160.0000
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical
Connectors
PRODUKT NAME

less details more details

TMPL

Mechanical
Electrical