Sendix 5883

Accessories
Tether arm, 150 mm

For encoders A020, A02H, H120
Mounting radius max. 215 mm
For applications with low axial and radial play, flexibly adjustable.

Scope of delivery
- Mounting arm
- 2 Allen screws M2.5 x 6
- 2 toothed lock washers

Connection to the application (not included in delivery)
- 1 screw

Accessories
Tether arm, long

For encoders A020, A02H, H120
Mounting radius max. 165 mm
For applications with low axial and radial play, flexibly adjustable.

Scope of delivery
- Mounting arm
- 2 Allen screws M2.5 x 6
- 2 toothed lock washers

Connection to the application (not included in delivery)
- 1 screw

Accessories
Guide pulley

With guide pulleys, linear movements can also be directed around obstacles. This not only increases their flexibility but can also compensate for installation tolerances. Idler pulleys can also act to clean off dirt and break ice.

Technical data:

• Installation angle (anodized aluminum)
• Guide pulley (plastic POM)
• Ball bearing (Type 696-2R5)

• 2 x countersunk screws for side fixing
• 2 x Allen screws for fixing on a flat surface

Accessories
Protective cover

For encoders A020, A02H
Pitch circle diameter 74.5 mm
For applications with axial play.
As a solution for applications with a very high degree of contamination with protective cap for increased reliability and extension of the encoder's service life.

Scope of delivery
- Torque arm, short (8.0010.4T00.0000)
- Protective cap
- 3 screws for mounting on the encoder
- Mounting accessories for attachment to the application

Accessories
Tapered shaft mounting kit, hollow shaft Ø 38mm

Pour codeurs A02H
Avec diamètre d'arbre creux 38 mm
Pour la mise à niveau en vue d'un montage sur arbre conique. Les arbres coniques sont utilisés pour un couplage direct de haute précision. Le kit de montage comprend également un insert isolant qui protège le codeur de manière fiable contre les courants ondulatoires.

Contenu de la livraison
- Insert de trou de sac conique Cône 1:10, longueur 17 mm
- Insert d'isolation
- Vis à six pans creux pour la fixation centrale.ning.

Accessories
Flange, Ø 65mm

For shaft encoders with flange ø 50 ... 58 mm
With this flange adapter, Kübler encoders of size 58 mm can replace third-party encoders of size 65 mm.

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 3 screws

Accessories
Adapter flange, square, 4 mm

For shaft encoders with clamping flange ø 50 ... 58 mm

Scope of delivery
- Flange adapter (aluminium)
- 3 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 4 screws

Accessories
Stator coupling

For encoders A020, A02H, H120
Pitch circle diameter 59.5 mm
For applications with axial and radial play at high dynamics.

Scope of delivery
- Stator coupling (stainless steel)
- 4 screws for mounting on the encoder

Connection to the application (not included in delivery)
- 2 screws

Accessories
Tether arm, 70 mm

For encoders A020, A02H, H120
Mounting radius max. 135 mm
For applications with low axial and radial play, flexibly adjustable.

Scope of delivery
- Mounting arm
- 2 Allen screws M2.5 x 6
- 2 toothed lock washers

Connection to the application (not included in delivery)
- 1 screw

Accessories
Fastening arm, short

For encoders A020, A02H
Mounting radius 74.5 mm
For applications with axial play.

Scope of delivery
- Torque support (stainless steel)
- 3 screws for mounting on the encoder
- Mounting accessories for attachment to the application

Accessories
Tether square

For applications with axial play and radial play with low dynamics for constant rotary motion.
Mounting bracket (stainless steel), 2 screws for mounting on encoder.

Accessories
Cylindrical pin, long with fastening thread

For encoders A020, A02H
With mounting thread.

Suitable for
- Spring element short (8.0010.4J00.0000)
- Spring element long (8.0010.4K00.0000)